Return to Realtime mode and create VLAN 10 and VLAN 30 on S1. Part 2: Add VLANs to a Switch Step 1: Create VLANs on S1. Without a MAC address, PC1 cannot create an ICMP echo request. PC1 and PC3 are not on the same network, so S1 doesn’t forward PC1’s ARP request (a broadcast packet) to VLAN30. What process failed and why? The ARP process failed because the ARP request never reached PC3.
Step 2: Switch to Simulation mode to monitor pings. Because the two PCs are on separate networks and R1 is not configured, the ping fails. When the link lights are green for PC1 and PC3, ping between PC1 and PC3. Wait for switch convergence or click Fast Forward Time a few times. Part 1: Test Connectivity Without Inter-VLAN Routing Step 1: Ping between PC1 and PC3. Finally, you will enable trunking and verify connectivity between VLANs. You will then configure VLANs and inter-VLAN routing. In this activity, you will check for connectivity prior to implementing inter-VLAN routing. Part 4: Test Connectivity with Inter-VLAN Routing Scenario Part 1: Test Connectivity without Inter-VLAN Routing 6.3.3.6 Packet Tracer – Configuring Router-on-a-Stick Inter-VLAN Routing Addressing Table Device
0 kommentar(er)
